PCS-12155 HYDRO-TECH WATER REDUCIBLE PRIMER

COLORS: Red Oxide, Gray

VOLUME SOLIDS: 30% + 2%

VOC AS SUPPLIED: As supplied:
Excluding water: < 2.7 lbs./gallon
Including water:  < 1.1 lbs./gallon

THEORETICAL COVERAGE: 480 sq. ft per mil per gal. (unreduced)

THINNING: None required for brush or roll; or airless spray

SUGGESTED FILM THICKNESS:
1.5-2.5 mils DFT direct to metal

APPLICATION: Brush, Roll, Spray, or Dip

APPLICATION TEMPERATURE:
40oF to 120oF

DRY TIME: At 77oF, 50% relative humidity: Dust free: 20 minutes; To
handle: 1-2 hours; Recoat: When dry to touch

SERVICE TEMPERATURE:
175° F for continuous service
200° F intermittent

PACKAGING: 5-gallon pails,
55-gallon drums, and totes

SHELF LIFE: 6-12 months in unopened
containers when stored between 40oF
min. and 100oF max.


PCS-12155 HYDRO-TECH
WATER REDUCIBLE PRIMER

DESCRIPTION:  PCS-12155 is a rust-inhibitive, general-purpose primer for both air-dry and force-cure applications.   The product contains non-toxic, corrosion-inhibitive pigments and is free of heavy metals.  It is V.O.C. compliant and has no flash point.

USES:  As an economical primer for structural steel, tank exteriors, rolling stock, metal roofs, building siding, etc., PCS-12155 may be top coated with a variety of finishes including alkyds, acrylics and epoxies.

SURFACE PREPARATION:All surfaces should be free of oil, grease, or other contaminants.  Abrasive blasting is the preferred method of surface preparation; however, loose rust and other interference materials can be removed by power-tool or hand-tool cleaning.

MIXING: Stir thoroughly before use.

THINNING: Thinning is generally not required for brush or roller application. For spray application, thin as required with water.

CLEAN-UP: Clean up immediately after use with soap and water.

CAUTIONS:  PCS-12155 is not flammable.  Components of this product may be skin irritants and/or skin sensitizers.  Rubber gloves should be worn to minimize skin contact.  Avoid breathing vapors of material.  IF SWALLOWED, DO NOT INDUCE VOMITING.  Call a physician immediately.  For eye contact, flush with water.

See material safety data sheets for full precautions prior to use.

 

 

PCS-12155 is intended for INDUSTRIAL USE ONLY.