PCS-12295 HYDRO-TECH WATER REDUCIBLE PRIMER

COLORS: Red Oxide, Gray

VOLUME SOLIDS: 40% + 2%

VOC AS SUPPLIED: As supplied:
Excluding water: 2.5 (+0.20) lbs./gallon
Including water: 1.0 (+0.20) lbs./gallon

THEORETICAL COVERAGE: 640 sq. ft per mil per gal. (unreduced)

THINNING: None required for brush or roll; or airless spray

SUGGESTED FILM THICKNESS:
1.5-2.5 mils DFT direct to metal

APPLICATION: Roll, brush, or spray

APPLICATION TEMPERATURE:
40oF to 120oF

DRY TIME: At 77oF, 50% relative humidity: Dust free: 45 minutes; To
handle: 1-2 hours; Recoat: Overnight

SERVICE TEMPERATURE:
175° F for continuous service
200° F intermittent

PACKAGING: 5-gallon pails,
55-gallon drums, and totes

SHELF LIFE: 6-12 months in unopened
containers when stored between 40oF
min. and 100oF max.


PCS-12295 HYDRO-TECH
WATER REDUCIBLE PRIMER

DESCRIPTION:  PCS-12295 is a titanate-modified, rust-inhibitive, air-dry primer designed specifically for use over less-than-ideal surface preparation.  The product contains non-toxic, corrosion-inhibitive pigments and is free of heavy metals.

USES:  As a general-purpose primer for structural steel, tank exteriors, rolling stock, metal roofs, building siding, etc., PCS-12295 may be top coated with a variety of finishes including alkyds, acrylics and epoxies.

SURFACE PREPARATION:All surfaces should be free of oil, grease, or other contaminants.  Abrasive blasting is the preferred method of surface preparation; however, loose rust and other interference materials can be removed by power-tool or hand-tool cleaning.

MIXING: Stir thoroughly before use.

THINNING: Thinning is generally not required for brush or roller application. For spray application, thin as required with water.

CAUTIONS:  PCS-12295 is not flammable.  Components of this product may be skin irritants and/or skin sensitizers.  Rubber gloves should be worn to minimize skin contact.  Avoid breathing vapors of material.  IF SWALLOWED, DO NOT INDUCE VOMITING.  Call a physician immediately.  For eye contact, flush with water.

See material safety data sheets for full precautions prior to use.

 

 

 

 

PCS-12295 is intended for INDUSTRIAL USE ONLY.